12
Installation
1.
Remove the big button then use a straight screwdriver and remove the thermostats »window« case.
2.
Do the electrical installation.
This part should be done by a qualified electrician or personel.
For electrical
wiring schemes look at page 2
3.
Install the thermostat in to the electrical socket of standard 60mm dimensions.
4.
Install the »window« case back and then 5. the button.
1
2
3
4
5
A.)
When installing the button back in place, turn the potentiometer completely to left so it will be easier to install
the button back in place.
B.)
Before installing the button you can set the set heating limitation by using those plastic limiters and put them
in place with the screw.
A.
B.
