49
Setting the Heating Schedule Programs
The condition for setting the Heating
schedule is that the Heating
programs are
turned
on (it is turned
off by default)
in the advanced settings.
Before proceeding, check the advanced thermostat settings. Depending on the set advanced
thermostat settings, you
can
set
on how
the schedule program
works. In advanced settings, you can
set your
schedule for 7 days (each day) or just turn it off.
The Heat
ing
schedule can be easily edited via the main editing menu
-
the thermostat must be turned
on
, then hold
(5 seconds) the middle menu
button (
button
description 3). Now you’re in the program
editing menu.
When you’re in the Heating schedule programs editing menu, you’ll see on the right side of the screen
a blinking icon (sun, moon, house…) which shows for which program switch you’re currently editing
the program. Also at the top of the screen, the day which you’re editing starts to blink. That means
that
you’re
editing
for
the
selected
day.
You change the values by pressing the
and
buttons and go to the next setting with the middle
menu button (button description 3). All the settings will be automaticly saved if you don’t press any
button for more than 10 seconds.
First you have to select for which day you’ll be setting the schedule. When you select the day, press
the menu button and then you’ll proceed to setting the time of when this schedule will start. When
you’re done setting the time, press the middle menu button and you’ll be setting the temperature for
that schedule. Set the desired temperature and again press the menu button. Now you’re done setting
the settings for the first Heating schedule switch of the program. Now a different icon on the right
should blink, which indicates that you’re editing for the next Heating program switch.
You can take a look at example of predefined Heating schedule programs
on
page 2.
All settings of heating schedule programs can be reset to factory defaults by holding the
button
(button description 2) for 3 seconds while editing the programs. Screen will show and blink dEF.
