14
Installation and using the thermostat
First, open the thermostat. You can do that by pushing the “button” with your
finger at the bottom side of the housing, where it says “OPEN”. Now gently
pull the case apart.
Enter two new alkaline
batteries AA LR6 1.5V in
the battery compartment.
After installing the
batteries, perform the wiring installation with your heating device.
On the thermostat cover is an installation scheme. Remove the
protection cover from the connectors. Screw the wires. Install
back the protection cover and before assembling the
thermostat back, use the back cover to preform wall
installation.
Now install the thermostat on desired location on the
wall. Make sure that the thermostat is placed on a
neutral position, not near a heating or cooling source,
on an inside wall and on a proper height. Doing so, we
allow the thermostat to work properly.
