1. Description & Coverage and Range
Passive Infrared Detector
PA-0112
Installation Instructions
2. Cautions on Installation
3. Installation (Ceiling)
Notice :
This detector is designed to detect an intruder and to sound
alarm when detected; it is not to prevent burglary.
We are
not
responsible for damage or losses from accident, theft, natural calamity,
misuse, abnormal use, improper installation and bad maintenance.
4. Wiring & Jumper setting
ALARM
- SENSITIVITY
-
+
- TERMINAL
Side view
Top view
Protection range
- ALARM
- LED ON/OFF
NC
ON
BASE
COVER (Lens)
SENSITIVITY
1 2 3
LED
ALARM
ON
OFF
NC
NO
Terminal
LED
PCB
SENSOR
LED ON/OFF
jumper
Sensitivity jumper
MIRROR PART
Alarm NC/NO
jumper
Wire entrance
NO
OFF
7°
51°
0
(8.2
’
)
2.5m
(20
’
)
6m
(40
’
)
12m
30°
84°
Avoid installing it at outdoor.
(indoor only)
Please avoid direct sunlight to
the detector.
Please install the detector in the
desirable detection site.
Please avoid installing it where
electric noise and vibration is
prevalent.
1) Separate the cover
from body.
2) Fix it where to install.
3) Connect wires correctly to
the plate of terminal.
4) Check sensor direction and then
close the body cover.
※
Note: PA-0112 is designed for indoor use only. It cannot be used for outdoor.
SENSITIVITY
1 2 3
LED
ALARM
ON
OFF
NC
NO
SENSITIVITY
1 2 3
LED
ALARM
ON
OFF
NC
NO
High Sensitivity
Low Sensitivity
