OIL-LESS AIR PUMP
ASSEMBLY INSTRUCTIONS
9805-00 OIL-LESS AIR PUMP
PUMP IS COMPLETELY ASSEMBLED AT FACTORY
-- RUBBER FEET (P/N 9700-06) AND HANDLE (P/N 9700-05) MAY BE
ORDERED IF DESIRED.
9810-00 AND 9820-00 OIL-LESS AIR PUMP
-- INSTALL HANDLE TOWARD PUMP FRONT END WITH HANDLE
FLANGES ONTO OF MOTOR BASE. USE RUBBER FEET
INSTALLATION FOR HANDLE SUPPORT
-- INSTALL REMAINING RUBBER FEET WITH NUTS AND BOLTS
PROVIDED.
PARTIAL PUMP ASSEMBLY HAS BEEN COMPLETED AT FACTORY:
-- SCREW INLET FILTER ASSEMBLY INTO INLET PORT (MARKED "IN").
IF INLET HOSE KITS ARE TO BE USED FOR REMOTE LOCATION OF
INLET AIR
-- INSTALL EXHAUST FILTER HOUSING ASSEMBLY WITH PRESSURE
GAUGE AND HOSE COUPLING (PRE-ASSEMBLED AT FACTORY) TO
OUTLET "TEE" EXHAUST PORT.
9840-00 OIL-LESS AIR PUMP
PARTIAL PUMP ASSEMBLY HAS BEEN COMPLETED AT FACTORY:
-- SCREW INLET FILTER ASSEMBLY INTO INLET PORT (MARKED "IN").
IF INLET HOSE KITS ARE TO BE USED FOR REMOTE LOCATION OF
INLET AIR
-- INSTALL EXHAUST FILTER HOUSING ASSEMBLY WITH PRESSURE
GAUGE AND HOSE COUPLING (PRE-ASSEMBLED AT FACTORY) TO
OUTLET "TEE" EXHAUST PORT.
3
Summary of Contents for Opti-Fit 9800-25
Page 15: ...11...
