Sartorius WZA25-NC, Installation Instructions Manual, Page: 18 / 46

18
Parameter Settings: Overview
ο
= Factory setting;
√
= User-defined setting
Level 1 Level 2 Level 3 Level 4 Code
1.)
Setup Bal.Scal Ambient V.Stable
Very stable conditions 1. 1. 1. 1
Weigh cell conditions
ο
Stable
Stable conditions 1. 1. 1. 2
functions (Filter adaptation)
Unstabl
Stable conditions 1. 1. 1. 3
V.Unstbl.
Very unstable conditions 1. 1. 1. 4
App.Filt.
ο
Final.Rd.
Final readout mode 1. 1. 2. 1
Application filter
Filling
Filling mode 1. 1. 2. 2
Stab.Rng. 1/4 dig.
(digit) 1. 1. 3. 1
Stability range
1/2 dig.
(digit) 1. 1. 3. 2
1 dig.
(digit) 1. 1. 3. 3
ο
2-dig.
(digit) 1. 1. 3. 4
4 dig.
(digit) 1. 1. 3. 5
8 dig.
(digit) 1. 1. 3. 6
Stab.
delay No delay 1. 1. 4. 1
ο
Short delay 1. 1. 4. 2
Medium delay 1. 1. 4. 3
Long delay 1. 1. 4. 4
Taring W/o Stb
W/o stability 1. 1. 5. 1
Taring
ο
W/ StAb
After stability 1. 1. 5. 2
Aut.zero off
1. 1. 6. 1
Auto zero
ο
on
1. 1. 6. 2
Wt.Unit
For list of units, 1. 1. 7. 1
Basic Gram to Newton to
Weight unit 1. 1. 7.23
Display
ο
all
1. 1. 8. 1
Basic accuracy
Minus 1
One level lower 1. 1. 8. 2
Increment of the measured values one level lower 1. 1. 8. 3
Increment of the measured values two levels lower 1. 1. 8. 4
Increment of the measured values three levels lower 1. 1. 8. 5
Incrm. 1
Last digit single increment 1. 1. 8. 6
resolution by a factor of 10 1. 1. 8. 8
Cal./Adj.
ο
cal. ext.
Adjustment/calibration with factory-set weight 1. 1. 9. 1
Function of the
ο
e.cal.usr.
External calibration/adjustment
Q
key with user-defined weights (factory-set on WZA25-NC) 1. 1. 9. 3
Cal.Int.
Internal calibration/adjustment only on models WZA…-NC 1. 1. 9. 4
lin.ext.
Linearization with factory-set weights 1. 1. 9. 6
lin.e.usr.
Linearization with user-def. weights 1. 1. 9. 7
str.prel.
Set preload 1. 1. 9. 8
clr.preload
Clear preload 1. 1. 9. 9
blocked
Q
Blocked 1. 1. 9. 11
Cal.routine
ο
Adj.
one sequence 1. 1. 10. 1
Cal./adj.
as required 1. 1. 10. 2
Cal.Unit
ο
Grams
1. 1. 11. 1
Weight unit
Kilogr.
Kilograms 1. 1. 11. 2
for calibration
Pounds
1. 1. 11. 3
Zero rng. default.
(factory-set) 1. 1. 12. 1
Zero range
ο
2
Perc
.ent 1. 1. 12. 2
5
Perc
.ent 1. 1. 12. 3
10
Perc
.ent 1. 1. 12. 4
Int.zero
Zero at power-on default (factory-set) 1. 1. 13. 1
Power On Initial zero 2%/max. cap 1. 1. 13. 2
ο
Initial zero 5%/max. cap 1. 1. 13. 3
Initial zero 10%/max. cap 1. 1. 13. 4
Initial zero 20%/max. cap 1. 1. 13. 5
Initial zero 50%/max. cap 1. 1. 13. 6
Initial zero 100%/max. cap 1. 1. 13. 7
on.tare
ο
On
1. 1. 14. 1
(Tare/Zero at
off
1. 1. 14. 2
Power/Zero-setting range)
Output rate
ο
Normal 1. 1. 15. 1
Fast (five times faster) 1. 1. 15. 2