10
Balance Operating Program.
The balance operating program lets you adapt your balance to
various ambient conditions and to different weighing require-
ments and select the weight unit(s) commonly used in your
country. At the factory we have set the codes for a Standard
program, which is protected by a locking function to prevent ac-
cidental changes.
The
"code"
contains the information of the operating program,
lt consists of three digits: one each for the page the line and the
word.
How to access the menu of the balance operating
program:
With the balance turned off (STANDBY state), hold down the
tare control
(8)
and simultaneously press the ON/OFF key
(5)
.
Upon completion of the automatic self-test, release the tare
control as soon as "CH 5" is displayed. The Status of the bal-
ance operating program will be indicated in the weight display:
"L"
Stands for the list mode. In this mode you can check the
menu code settings, but you cannot program new menu codes.
lf you wish to change a program menu code, you must first
unlock the menu access switch to access the menu.
To do so slide the menu access switch
(4)
, located at the front
right of your balance, in the direction of the arrow.
The display will indicate
"C"
, which Stands for the change
mode, meaning you can now proceed to make the necessary
code changes.
