Sartolab
®
RF | BT Instructions for Use
13
Storage
5.2 Performing Filtration
Procedure
t
Connect the vacuum source so that a vacuum is applied to the product
(See instructions for the vacuum source or support manifold).
y
The filtrate is collected in the collection tube or receiver bottle.
5.3 Ending Filtration
CAUTION
Danger of injury due to spilled liquids!
t
Do not
cause any sudden movements to the product that could tip it
over or destabilize it.
Procedure
t
Shut off the vacuum source (see instructions for the vacuum source or
support manifold).
t
Remove the product from the support manifold (see instructions for the
support manifold) or pull the vacuum tube out off the tube adapter.
t
Unscrew the funnel with adapter from the collection tube or receiver
bottle and dispose of it.
5.4 Preparing Filtrate for Storage
(Sartolab
®
RF 50 | RF 150 – 1000 Only)
The filtrate can be stored in the collection tube or receiver bottle. The
receiver bottle must be sealed with the appropriate screw cap.
Procedure
t
Unpack the screw cap and screw onto the collection tube or receiver
bottle.
6 Storage
6.1
Storing the Product
Procedure
t
Store the product in accordance with the storage conditions (see
Chapter 8.3, page 16).
Summary of Contents for Sartolab BT 1000
Page 2: ......