t
If not, go into the submenu “DHCP.”
t
Select “On.”
t
Confirm with the
l
button.
y
The DHCP mode is now enabled.
When you switch on the scale, the scale is automatically
assigned an IP address by the DHCP server.
t
Check the network connection (see Chapter 4.3,
page 10).
4.2 Connecting to a Network with a Fixed
IP Address
The following settings must be made to connect the scale to
a network with fixed IP addresses:
4.2.1 Configuring Network on a PC
t
Open the Network and Sharing Center on your Windows
PC: Start -> Control Panel -> Network and Sharing Center
1
t
Open the LAN connection (1).
t
Call up the properties (2) of the LAN connection.
3
4
t
Select the entry “Internet Protocol Version 4” (3) from the
list.
t
Open the properties (4).
2
Installation Instructions VIS1Y
9
English
