Interface Description
Pin Assignments
9-contact female connector:
Pin 2: (RxD) Receive data
Pin 3: (TxD) Transmit data
Pin 4: (DTR) Data terminal ready
Pin 5: (GND) Ground
Pin 6: BPI bridge
Pin 8: Clear to send (CTS)
Installing the Adapter Cable
The adapter cable is required for operation of the
scale with a PC. If you wish to create your own
application software, Sartorius can supply the
required drivers for DOS or Windows operating
systems.
!
Make sure to observe the safety instructions.
§
Remove the protective cover from the interface port.
Keep the protective cover in a safe place.
$
Replace the interface cover when storing or shipping
the scale.
§
Plug in the adapter cable and tighten the retaining
screws
20
Connector on adapter cable
