Instruction Manual
Induction Cooking Plate
Model CT 25-A
Order no. 301-1000
General notes
•
Carefully read these instruction manual through as they contain important information.
•
It is advisable to keep the instruction manual in a place where you have them always
ready to hand. Should you pass the induction cooker on to a third party, this instruction
manual must be handed on.
•
As soon as you have unpacked the induction cooker, check whether everything is in a
faultless condition. Should anything be damaged, do not connect the appliance as such,
but inform your dealer.
•
The induction cooker must only be used for the intended purpose. Improper use can
cause damages and lead to the loss of the warranty.
•
Before you connect the induction cooker, make sure that the type of current stated on the
identification plate corresponds with your mains supply.
•
In the case of fault and/or malfunction, pull the plug out of the socket and inform your
dealer. He will carry out the repair with original spare parts.
•
Please observe the local regulations concerning accident prevention and disposal.
•
The manufacturer/dealer cannot be made responsible for damages which arise through
not observing these operating instructions. Apart from this, if these instructions are not
observed, induction cooking plate safety is no longer guaranteed.
Safety notes
1. Place the induction cooker on a stable and level surface (never on a flammable surface,
e.g. carpet, table cloth etc.). Keep a minimum distance of 10 cm to walls or other items.
Note: Do not block the ventilation slots of the device. This may overheat the device.
2. Use only compatible induction cookware with diameter of 12 to 26 cm.
3. Don’t touch the hot surface of the glass field. Please note: the induction cooker does not
heat up itself during cooking, but the temperature of the cookware heats up the hotplate.
4. Do not place any empty containers on the induction cooker.
5. Cable and plug must not be touched with water.
6. Do not plug into a socket where several other appliances are plugged in.
7. Do not pull the plug out of the socket by the cable.
8. The cable must not hang over table edges and/or sharp edges. It also must not come into
contact with the hot appliance surface or with water.
9. Check regularly the cable. If it is damaged, it must be exchanged by a qualified specialist.
10. Do not put the induction cooker near to gas or electric ovens and/or other sources of
warmth. Take care that no curtains or other flammable materials come into contact with
the oven when it is in use.
page 1
