Instruction Manual
Ed. December 2019
Hydro-pneumatic tool for blind rivets
3.0 ÷ 6.4 mm all alloys, and 7.8 mm aluminum
SAR 008
3
1 - SAFETY INSTRUCTIONS
Users must read the instructions given herein thoroughly before starting to use the tool.
If you ha
ve any doubts about the instructions contained in this user’s manual, do not hesitate to contact
Sariv S.r.l. (see Section 2.1) for further explanations.
In any case:
-
wear safety glasses or goggles while using the riveter
–
rivets are dispensed with force and at high
speed, and may cause damage or bodily harm;
-
do not leave the riveter plugged into the air supply when the tool is not in use;
-
never point the riveter towards someone;
-
keep the tool out of reach of children at all times.
2
–
GENERAL INFORMATION
2.1 - MANUFACTURER
Sariv S.r.l. has been operating on the fasteners market for years. The company has a consolidated technical
experience and offers a wide range of products related to fastening systems.
Phone: +39 049 594 13 13
Email: [email protected]
2.2 - ASSISTANCE
In case you need any assistance concerning the use and the maintenance of the tool, or in case you need to
order any spare parts, you shall contact your local authorised dealer (or Sariv S.r.l. directly) specifying the
version of the tool.
2.3
–
CERTIFICATIONS AND EC MARKING
The tool is manufactured in compliance with the European Directives, which are in force when the tool itself
is put on the market. As the tool is not included in ENCLOSURE IV of DIRECTIVE 89/392/EEC, Sariv S.r.l. issues
a self-certification to apply the EC marking.
2.4 - WARRANTY
The warranty has a validity of 12 months, starting from the date indicated on the invoice, and covers only
replaced parts (labour is not included).
Tool damages caused by any of these cases below are not covered by warranty:
•
transport and/or handling,
•
user’s mistakes,
•
failed servicing/maintenance, as indicated in section 5 of this manual,
•
faults and/or breakages that are not attributable to tool anomalies,
•
normal consumption of parts of the riveter.
The warranty is invalidated both in case of unauthorised tampering/replacements of tool components and in
case of use of accessories different to those recommended by the manufacturer, which could even cause
injuries to the tool’s user.
Sariv S.r.l. assumes responsibilities only if the tool is originally defective, but declines all forms of
responsibility if the user fails to follow the instructions given.