Instruction Manual
Ed. January 2021
Hydro-pneumatic tool for blind rivets
2,4 ÷ 4,0 mm all alloys, and 4,8 mm aluminum
SAR002
7
-
To remove the oil in excess, unscrew part #51 approximately 1/4 turn. Depress and release the
trigger to make the air circulate through the riveter; the oil will leak out of the top of the tool from
the oil hole as the trigger is depressed.
Remove excess oil
-
Depress and release the trigger as needed, until the rivet head touches the nosepiece and then
tighten the screw (# 51) with Allen wrench.
Tighten oil plug
The tool is now ready to be used.