Saris Cycling Group PowerTap P1, Quick Start Manual, Page: 8 / 60

8
PROCEDURES
Warranty service will be performed by Saris
Cycling Group or an authorized Saris Cycling
Group Dealer. The original purchaser must
provide proof of purchase. Service calls and/or
transportation to and from the Authorized Saris
Cycling Group Dealer are the responsibility of
the purchaser.
•
Saris Cycling Group will have the option
to repair or replace any product(s) which
requires warranty service.
• Saris Cycling Group will replace any unit
that is structurally defective with a new
unit or replace the unit with a unit of equal
value.
• In the event a product cannot be repaired,
Saris Cycling Group will apply a limited
credit reimbursement toward another
PowerTap product of equal or greater
value.
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) This device must accept
any interference received, including interference
that may cause undesired operation.
The grantee is not responsible for any changes
or modifications not expressly approved by the
party responsible for compliance. Such modifi-
cations could void the user’s authority to operate
the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equip-
ment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equip-
ment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
IC Statement
This device complies with Industry Canada
licence exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
CAN ICES-3(B)/NMB-3(B)
24333C_P1 Pedal User Guide.indd 8 2/2/2018 9:22:18 AM