Passport 1000 P2 WiFi Exit Device
Copyright © 2014, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14
20 1-800-810-WIRE • www.sargentlock.com • A8012F
For devices without cylinder, go to Step 7.
1. Slide cylinder through ET Trim and thread into
the lockbody, rotating the cylinder clockwise.
Cylinder should rest flush on ET Case.
Note: SARGENT logo must be horizontal
and on the top of the cylinder (Fig. 6B).
2. Secure the cylinder by tightening cylinder
clamp screw located above the guardbolt.
3. Verify that the key retracts the latchbolt.
Fig. 6A
Outside of Door
Set Screw
#46 Cylinder
Secure chassis cover to chassis using
(4) #8-32 x 5/16” oval head machine screws.
Inside of Door
Fig. 7
Chassis Cover
(4) #8-32 x 5/8” Oval
Head Machine Screws
Position cylinder so that the
SARGENT logo is right-side up.
Correct Incorrect
Fig. 6B
6 Install Cylinder
7 Install Chassis Cover
