ACCESSORIES INFORMATION
1431-W corner bracket closer is mounted on bracket which is attached to door jamb
on stop side of door
Use this application for exterior doors to keep the closer inside of building; Also may be
used to obtain full 180
°
door opening
MORTISE NUTS FOR BOLTING THRU THE DOOR ARE FURNISHED WHEN ORDERED
3
PAGE
STANDARD APPLICATION
E1) Opening the door slightly, slide rod into swivel arm and then close the door
E2) With the door closed, position the swivel arm so that it is 90º to the door surface
E3) Tighten the arm screw securely
E
Adjust closer
as required (See page 8 for details).
F
1
5
4
MAIN
ARM
INDEX MARK
ON SPINDLE
2
3
1430-J COVER PLATE
MAY BE USED WHEN CLOSER IS MOUNTED
ON A NARROW RAIL TO IMPROVE APPEARANCE
WHEN CLOSER IS VIEWED THRU GLASS
H8 MORTISE FOOT
FOR USE WHERE THE
STANDARD SURFACE
APPLIED FOOT CANNOT
BE ATTACHED TO THE
TOP CASING OR WHERE
APPEARANCE IS A
MAJOR FACTOR
RIGHT HAND DOOR
ROD
90
°
ARM
SCREW
POSITION OF MAIN
ARM WHEN ASSEMBLING
TO SPINDLE
HOLD
OPEN ARM
© SARGENT Manufacturing Company 2006, 2007 All rights reserved
FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
A7140E
