2
How to connect
1.
Keep your Bluetooth device within 1 meter of your wireless earphone when
pairing.
2.
Enter pairing mode as follows: First, ensure your SX-918 is off. Next, press and
hold the MFB for approximately eight seconds. You will know that the device has
entered pairing mode when the red and blue LEDs flash rapidly.
3.
Using your Bluetooth device, scan/search for available Bluetooth devices. Select
Power on from the list of devices shown.
4.
If prompted for a password or PIN, enter the following: 0000
5.
Some cell phone models can connect automatically, and others will provide a
prompt. If prompted by your cell phone to connect, select 'Yes'.
6.
Once a connection has been established successfully, the blue LED on the
headset flashes twice every four seconds.
Multi-pairing
1.
Start by long pressing the MFB for three seconds to turn the wireless earphone
off. Next, long press the MFB for about eight seconds, until the red and blue LEDs
on the earphone flash repeatedly. This indicates entry to the search and pairing
state.
2.
Turn on the Bluetooth of mobile phone #1 and search for SX-918, then click to
complete the connection.
3.
Turn off mobile phone #1's Bluetooth. Then turn off the earphone by long
pressing the MFB until the red LED turns on.
Long press the MFB for three seconds to turn it on again.
4.
Then long press the MFB for eight seconds, until you see the red and blue LEDs
on the earphone flash repeatedly again, indicating entry to the search and pairing
state.
5.
Turn on the Bluetooth function of mobile phone #2. Search for SX-918 and click
to complete the connection.
6.
Turn on mobile phone #1's Bluetooth function and find the connected wireless
earphone. Click to complete the connection.
Summary of Contents for SX-918
Page 1: ...SX 918 user manual ...
