4
Output mode
The output mode can be selected to mono or
stereo.
When the output mode is mono, the audio from
left and right channel will be mixed. When it is
stereo, the left and right audio channel output
will be separated.
In Stereo mode, the audio of group A & C will be
output to left channel, the audio of Group B will be
output to right channel.
• Default is "mono."
Power locked / unlocked
Long press the SET button to enter the menu.
Use the"+" and "-" to set unlocked or locked the
power key. Lock the power key to prevent the
receiver being turned off unwittingly while using.
• Unlocked: Long press the power key to turn
on/off the receiver (System default).
• Locked: The receiver will not be turned off
even after pressing the power key.
Mute key enable / disable
Long press the SET button to enable / disable
Mute function.
• Enable: Press power button to turn Mute On /
Off.
• Disable: The audio will not be muted during
using.
• Default is "enable
.
"
Match with TX
Long press the SET button to enter "Match
with TX". Then, short press to start "Match with
TX" in the RX and "Match with RX" in the TX
simultaneously to match the TX with RX.
The RX can't match with two or three TXs
RX & TX connecting indicator
"
———
": The RX hasn't been matched with a TX in
this group.
"
A
"or"
B
"or"
C
" flashing: The RX has been
matched but hasn't been connected with the TX
in this group.
"
A
"or"
B
"or"
C
" solid: The RX has been matched
with the TX successfully in this group.
NOTE:
Details please refer to "Match with TX"
& "Match with RX" (page 4/7).
Ύ
Volume indicator
Indicates the volume of audio output.
Ώ
Mute indicator
MUTE ON MUTE OFF
NOTE:
MUTE on RX will mute the output audio.
ΐ
Battery level indicator
Displays the battery level. Please replace both
batteries immediately when the indicator starts
flashing.
NOTE:
Low battery might cause an unstable
transmission of audio signal.
Α
Current channel
Displays the current channel number.
NOTE:
The channel can only be changed
manually in the RX.
Once the RX is matched with the TX(s), the
channel number of TX(s) will be changed with
RX synchronously all the time.
Set output volume
Long press the SET button to enter the menu.
Use the"+" and "-" to set the volume of output
audio within the range 0 to 31, short press for
exit with saving. The setting is retained even after
the power is turned off.
• Default is "25."
