Saramonic UwMic9 User Manual Download Page 7

Page: 7 / 48

LCD Display Operation Guide

Home screen.

If no operation is performed for 20 seconds

on the other screens, the display will automatically return to
the home screen.

①

Group icon

Indicates the power of group A is turned off.

Indicates the power of group A is turned on.

②

RF level indicator
Indicates the current reception level.

③

Battery level indicator
Displays the battery level. Please replace both batteries
immediately when the indicator starts flashing.

④

Name of the channel group

⑤

Current channel
Displays the current channel number.

⑥

Audio input level meter
Displays the audio input level.

Power key.

Long press the SET button to unlocked or locked

the power key. Lock the power key to prevent the receiver
being turned off unwittingly while using.
•

Unlocked:

Long press the power key to turn the receiver

on or off (System default).

•

Locked:

The receiver will not be turned off even after

pressing the power key.

Note:

If the batteries are removed and reinserted while

the power key is set to Locked, the lock state of the Power
key will not be changed. You can turn on the receiver by
long pressing the power button.

① ②

②

③

④
⑤

⑥

①

Summary of Contents for UwMic9

















































Search results

Summary of Contents for UwMic9

Reviews:

Related manuals for UwMic9

Brands by name

Popular brands

Saramonic UwMic9, User Manual

Search results

Summary of Contents for UwMic9

Reviews:

Related manuals for UwMic9

Brands by name

Popular brands