12
②
Power / Mute button
Power: Long press to turn on/off the SR-HM15.
Mute: Short press the button while transmitting, the audio
will be muted. Press it again to restore the audio output.
Note:
In muting, the audio signal is not output but an RF
signal is still transmitted.
③
Antenna
④
Battery compartment
Operates on two AA batteries (not included).
You could use alkaline, lithium or nickel metal hydride
batteries.
Setup Guide
①
Install the batteries. Refer to "UwMic15-SR-HM15" (page 18).
②
(Option) Set the lock switch to ON or OFF.
③
(Option) Set the RF power to HIGH or LOW. The transmit
power level varies depending on the model.
④
Press the power button to turn on the UwMic15-RX15.
⑤
Turn on the receiver UwMic15-RX15 and sync with the
transmitter UwMic15-SR-HM15. Details of operation,
please refer to "For UwMic15-SR-HM15" (page 19).
⑥
When sync successfully, the screen of UwMic15-SR-HM15
will show the group and channel same as the receiver.
⑦
Close the grip in the direction of the arrows.
⑧
Now it is ready to use.
