Saramonic SR-Q2M User Manual Download Page 4

2

Η
Θ

Ι

Κ

Λ

Μ

Ν

Ξ

Ο

Π

΍

X/Y stereo microphone

The X/Y configuration angled 90° to produce 
realistic stereo image.

Ύ

PEAK/REC LED indicator

The LED indicator will be in solid red while 
recording;
The LED indicator will flash in red while signal 
overload.

Ώ

LCD screen

Displays menu, please refer to "6. LCD 
Screen" for more details.

ΐ

HOME button

Back to previous menu or back to the main 
menu during recording.

Α

REC button

Press the REC button to start recording 
immediately.

Β

Control panel

Go through menu and select functions or 
values shown on the display. Refer to "5. 
Control Buttons Introduction"

Γ

MICROPHONE IN jack

A stereo 3.5mm microphone jack.
Plug in 3.5mm stereo TRS microphone.

Δ

Built-in speaker

Easily check the playback audio with no delay.

Ε

1/4" -20 female screw

Ζ

Battery compartment

      Please refer to "4.1 Install two AA batteries
      and a memory card."

Η

LINE IN jack

3.5mm line input jack to plug in external 
audio sources.

Θ

REMOTE jack

2.5mm remote jack for connecting the 
included remote control.

Ι

"+ -" INPUT LEVEL control

Adjust the level of incoming audio signal.
Press "+" to increase and "-" to decrease.

Κ

Power & HOLD button
Power on / off

Slide the power button to   for 2 seconds to 
turn on / off.

Summary of Contents for SR-Q2M













Reviews: