1.3.5 LINE / MIC Switches
※
Select LINE or MIC levels
The MIC level is for microphones or wireless system.
The LINE level is for mixers and other audio devices with a line level output.
Set the LINE/MIC switch to LINE to attenuates the signal about 40dB
1.3.6 GND1/GND2 Ground Switch
※
Eliminate ground hum and noise for getting the best sound
GND1:
Separate the output signal ground from the input signal ground. To
avoid the noise of the input signal passing to the output signal. This noise is
usually caused by AC power, for instance, mixer with AC power adapter.
GND2:
Connect the output signal ground to the input signal ground.
1.3.7 Plastic Chassis With a Tripod Socket
1.3.8 Passive Circuit Make it Noise Free
1.3.9 No Power or Batteries are Needed
1.3.10 Easy to Set Up and Use
1.3 Highlights
1.3.1 Inputs
※
One 1/8" (3.5 mm) Auxiliary Mini-Jack Input
※
Two balanced XLR inputs
Note:
The AUX Input is ideal for connceting wireless deceives with a 3.5mm
output. As it sends signal to the right channel, please do not use the right
XLR Input while using the AUX Input.
1.3.2 Output
※
One stereo 1/8" (3.5 mm) Mini-Jack output
1.3.3 Dual Trim Control Knobs
※
Adjust the signal of each channel to the optimum recording levels
1.3.4 Mono /Stereo Switch
※
Select mono or stereo output mode
The Mono mode is for one mono microphone recording. It can send the
mono audio signal to each channel and output stereo audio signal.
The Stereo mode is for two channels recording, it provides two separate
channels of audio.
