14
Operation Guide
For the Blink500 Pro B1/B2 kit
For the Blink500 Pro B3/B4/B5/B6 kit
1. Turn on the transmitter TX by long pressing the power key.
2. Turn on the receiver RX by long pressing the power key.
3. Press hard the pairing button of charging box.
4. The kit will be paired when the pair indicator of OLED display of
TX should be indicate RX battery level, and the pairing indicator
should be shown" ".
5. Connect the receiver RX to the mic jack of a camera, camcorder,
recorder or mixer with the supplied 3.5mm
TRS audio cable. Or connect the RX to a smartphone or tablet with
the supplied 3.5mm TRS to TRRS audio cable.
6. You are ready to record.
Note: The output of receiver RX is line out. You can connect it
to speaker system. To avoid noise during connection, before
connecting the receiver to a speaker system, please mute the
speaker system and do not use the headphones.
1. Turn on the transmitter by long pressing the power key.
2. Press hard the pairing button of charging box.
3. The kit will be paired when the pair indicator of OLED display of
TX should be shown" ".
4. Plug the RXDi into an iOS device or the RXUC into an USB
Type-C device. Please make sure the antenna (yellow side) is
oriented on the top of the device, when in landscape mode, to get
the best signal.
5. You are ready to record.
