sarahellison.com.au
page 2 | 4
STEP 1
STEP 2
Open box carefully, ensuring the blade of the knife does not come into
contact with the product. Remove packaging and lift the product up out
of box and gently place on ground.
Lay the Table Top upside down onto a padded, non-marring surface.
Lift the first leg into place, aligning the holes on the metal tongues to
the corresponding holes on the Table Top base as shown. Secure the
Leg using Allen Bolts (H-1) and Spring Washers (H-2), stacking the
hardware in the order shown. Engage all bolts by hand first, then fully
tighten them using Allen Key (T-1). Repeat the process above to install
the second Leg.