E350 Mainboard
~ 15 ~
2-7 Jumper Settings
If the CMOS data becomes corrupted or you forgot the supervisor or user
password, clear the CMOS data to reconfigure the system back to the default
values stored in the ROM BIOS.
2-8 Diagnostics LED
This mainboard provides a two-digit POST code to show why the system may be
failing to boot. It is useful during a troubleshooting situation.
Please find a list of debug codes in the full manual found on your installation
CD.
Debug LED
To clear CMOS data, please follow the steps below.
1.
Turn off the system.
2.
Change the jumper from “1-2” to “2-3” position
for a few seconds.
3.
Replace the jumper back to the “1-2” position.
4.
Turn on the system and hold down the <Del> key
to enter BIOS Setup.
