_
English
_
b)
Take out the bag holder then remove the full dust bag (Fig 11).
2.
Installing the dust bag:
insert the dust bag into the bag holder and then put it in the slot cabinet
(Fig 12).
If the dust bag is not installed, the front cover can't be closed.
3.
Inlet filter:
clean the filter with warm water once a year and you can install it after dry. If the
filter is damaged, it should be replaced with new one (Fig 13).
4.
Changing the inlet filter:
clip down and remove the inlet cover by hands for exchange of filter
(Fig 14).
5.
Cleaning the filter:
open the front cover and draw out the HEPA frame and filter. Wash it and
install it after dry (Fig 15/16/17).
Fig 9 Fig 10 Fig 11 Fig 12
Fig 13 Fig 14 Fig 15 Fig 16 Fig 17
WARNING
The plug must be removed from the power socket before any maintenance or replacement.
