_
English
_
4.
Press the “
TARE/ON
” key to zero the scale. The weight of the container will be
cleared. Then put food into the container, the weight of the food only will appear on
the display.
5.
Hold the “
TARE/ON
” key for 3 seconds to power off the scale.
ERROR DISPLAY INTRODUCTION
•
When the scale is over loaded, the “
EEEE
” will appear on the display.
•
When the screen shows “
LO
”, it means that the power is low. Please change the
batteries as soon as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
•
Use 1xCR2032 lithium battery (included).
•
When change the batteries, please open the battery cover on the back, put 1xCR2032
lithium battery in the battery case (make sure to keep the polarity), then close the
battery cover tight.
•
The product includes 1*CR2032 lithium battery, please install it before using.
ADVICES FOR USE AND CARE
•
Put the scale on a clean and flat table.
•
The max weight of the scale is 5000g, which included the weight before tare.
•
To ensure long-life of the scale, do not put the scale under wet, hot & cold conditions.
•
The product belongs to high precision electronic weighing apparatus, please do not
press or drop the scale, otherwise the scale may be permanently damaged.
•
If the scale surface is dirty, please clean the scale with soft cloth. Do not use any
chemical detergent and do not allow water to get inside the scale.
•
The product is for household use only.
•
If the result appears improperly, please check about whether the battery and the
touching point contacts well. Replace the battery if they were used for a long time
already. Then try again.
•
Remove battery from the product, if you will not use it for a long time.
