![Sapir SP-1651-C1 Instruction Manual Download Page 3](http://html1.mh-extra.com/html/sapir/sp-1651-c1/sp-1651-c1_instruction-manual_1198618003.webp)
possible.
•
When the screen shows “
OUT2
” and power off, it means that the scale is overloaded or unsteady.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
•
Use 2xAA batteries.
•
When change the batteries, please open the battery cover on the back, put 2xAA batteries in the battery
case (make sure to keep the polarity), then close the battery cover tight.
•
The product includes 2xAA batteries, please install them before using.
ADVICES FOR USE AND CARE
•
Put the scale on a clean and flat table.
•
The max weight of the scale is 3000g/5000g, which included the weight before tare.
•
To ensure long-life of the scale, do not put the scale under wet, hot & cold conditions.
•
The product belongs to high precision electronic weighing apparatus, please do not press or drop the
scale, otherwise the scale may be permanently damaged.
•
If the scale surface is dirty, please clean the scale with soft cloth. Do not use any chemical detergent
and do not allow water to get inside the scale.
•
The product is for household use only.
•
If the result appears improperly, please check about whether the batteries and the touching point
contacts well. Replace the batteries if they were used for a long time already. Then try again.
•
Remove exhausted batteries from the product.