_
English
_
Electric Double Mill
SP-1227-C
INSTRUCTION MANUAL
How to Load the Batteries
Requires 6xAAA batteries (batteries not included).
Step 1:
To open the mill, hold the base and turn the top of the mill in the counter-clockwise
direction. Remove the top from the base.
Step 2:
Insert the batteries into the slots of the battery compartment with respect to the polarity.
Step 3:
Place the top of the mill back on the base. By holding the base, turn the top of the mill
clockwise. You will hear a click when the mill is in the locked position.
How to Fill the Electric Double Mill
Step 1:
Remove the top of the mill as directed in step 1 of “How to load the batteries”.
Step 2:
Lift the battery compartment off of the base.
Step 3:
The chamber features dual compartments. One side for peppercorn (marked with P) and
the other for sea salt (marked with S). Fill the corresponding chambers with peppercorn and sea
salt.
Step 4:
Align the notch on the battery compartment with the dividing slots on the chamber.
Step 5:
Replace the top of the mill as instructed in step 3 of “How to load the batteries”.
How to Use the Electric Double Mill
Step 1:
To adjust the grinding size, turn the dials on the underside of the mill.
Coarse:
Counter-clockwise (noted by large circle).
Fine:
Clockwise (noted by small circle).
Step 2:
Push the button marked with a “P” for pepper and “S” for salt.
Cleaning
To clean your Electric Double Mill, wipe with a damp cloth or sponge. Do not immerse the mill in
water or let the battery compartment come in contact with water.
Warnings
Do not mix old and new batteries. Replace all batteries at the same time.
Your Electric Double Mill is not a toy and should be kept out of the reach of small children.
