_
English
_
AFTER USING
Press the ON/OFF switch to stop the vacuum cleaner, and press the cord-rewinder
button to roll back the power cord.
ATTENTION
: If the power cord cannot be rewound completely, please pull it out a
little bit and press the cord-rewinder button again. You can repeat the rewinding steps
until the cable is rewound completely.
REPLACING THE DUST-CUP
1.
When the dust reach to the 1/4 level in the dust-cup, it means that the dust-cup is
full. At this moment, dust-cup should be emptied and the filter should be washed.
2.
Open the dust-cup as showing in the picture.
MAINTENANCE
1.
The filter should be washed often when it is dirty.
2.
When the plastic filter is full of dust, it should be washed.
FULL
