Parts list
Functions
Battery instalation
Lighting Indications
Fixing the Trash Bag
1. Flap
2. Lid
3. Button panel
4. Body
5. Switch button
6. Battery cover
7. Plastic liner
Effective range:
This product will sense when an object passes through the sen-
sors range, which is about 7,87in/20cm (± 1,97in/5cm) above the
panel.
Modes:
Stand-by mode
– The lid stays closed and the bin is waiting for a
signal to open. A red light flashes to indicate this mode.
Sensor mode
– When the sensor unit spots the signal, the lid will
open. The lid will stay open as long as the signal stays in the effec-
tive range. After the object is removed from the range, the lid will
close in 5 seconds.
Manual mode
- Users can open the lid by pressing the „OPEN“
button. The lid will stay open until the „CLOSE“ button is pressed.
During this mode, a red light in the middle will flash.
1. Wrap the top rim of the liner with plastic bag (please
leave the handle outside for easy operation);
2. Press the excess bag into the bag fixer on the liner .
1. Open the battery cover and take out old
batteries (if there is any)
2. Install the batteries into battery box,
please mind the polarity (6xAA – not
included)
3. Push battery cover to close position, make
sure the clip snap firmly
4. Turn on the swich button
Red light in the middle indica-
te Waiting/Manual mode
The lights turn on from left to
right when the sensor spots
open signal
The lights turn off from right
to left when the open signal is
removed
