8
The canopy is held in place by a rubber band all ready fitted in the fuselage.
Connect rubber band to white hook on canopy. To fit canopy slide the front in first then the rubber band
holds the back in place. Refer to photo.
TIP- Although the undercarriage works well off short grass and pavement surfaces. The model will fly
faster with them left off, due to less drag, and looks more scale like in the air. The supplied landing
skids as shown above, may be added for landing in this situation.
CENTER OF GRAVITY PLACEMENT
All of the parts are located in set positions for the C.G. to be correct. If C.G. is not correct add weight ( like
some clay or nails ) to tail or nose to achieve correct balance.
SPEED CONTROLLER SET UP
If you have purchased the ARF version you
will need to supply and fit your own speed
controller. There is a rear hatch under fan unit
to access wires from motor. Refer to you
speed control instructions on how to wire your
speed controller to the fan unit
