Sanyo Xacti VPC-S7 Instruction Manual Download Page 36

Page: 36 / 143

English

Adjust the monitor brightness

The brightness of the monitor is adjustable. Adjust the brightness to the
optimum readability in the ambient light.

Press the ON/OFF button to
turn the camera on.

Press the MENU button for at
least 1 second.

The monitor brightness menu
appears.

Press the [

] and [

] buttons

to adjust the brightness.

When set to AUTO, the
illumination sensor (page 14)
detects the ambient
brightness and automatically
adjusts the brightness of the
monitor accordingly.

Press the MENU button.

The monitor brightness is
set, and the monitor
brightness menu is canceled.

HINT

You can also adjust the monitor brightness by selecting “BRIGHTNESS”
from the Option Menu (page 88).

BRIGHTNESS

ON/OFF button

MENU button

[

] and [

] buttons

Monitor brightness menu

Summary of Contents for Xacti VPC-S7
















































































































































Search results

Summary of Contents for Xacti VPC-S7

Reviews:

Related manuals for Xacti VPC-S7

Brands by name

Popular brands

Sanyo Xacti VPC-S7, Instruction Manual

Search results

Summary of Contents for Xacti VPC-S7

Reviews:

Related manuals for Xacti VPC-S7

Brands by name

Popular brands