USING THE AUTOFOCUS
œ
Fast-moving subjects
Use the focus-lock function to lock the
focus on an object at the same distance
as the desired subject, then reposition
the camera to compose the picture.
Hints for taking pictures
Operation sounds
œ
The operation sounds that are generated, for example, when the power is
turned on or off, or the shutter release button, MENU button, MODE button
or SET button is pressed, as well as the audio guidance when you switch
the mode can be muted (see page 141).
Saving battery pack power
œ
When you take pictures without using the LCD monitor, you can slow down
the rate of battery pack consumption (see page 70).
Where is the image and audio data saved?
œ
All the image and sound data is recorded on the card installed in the
camera (see page 160).
Taking pictures in backlight conditions...
œ
When taking pictures with the light coming from behind the subject, due to
the characteristics of the lens, light lines or ghost patterns (flare
phenomenon) may appear in the captured image. In this situation, it is
recommended that you avoid taking pictures with the subject lit from behind.
While the image data is being recorded...
œ
The accessing indicator will light orange while the image is being written to
the memory. Another image can be captured only after the accessing
indicator lights green again. However, even when the accessing indicator is
lit orange, depending on the camera’s internal memory remaining capacity,
in some cases about 2 seconds after shooting the next image can be
captured.
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
39
English
Summary of Contents for Xacti VPC-J1
Page 202: ...SANYO Electric Co Ltd ...
