Sanyo Xacti VPC-CA100EX Manual For Basic Operation Download

Page: 79 / 91

APPENDIC

English

Misc.

The “Cannot edit
video clips with
unlike settings”
message
appears.

You have
attempted to join
video clips having
different
resolutions or
frame rates.

Select video clips
that have the same
resolution or frame
rate.

Why is a noise
heard from a
nearby TV or
radio during
battery
recharging?

Electromagnetic
waves are emitted
from the charger.

Move the AC
adaptor further away
from the TV or radio
when recharging the
battery pack.

Why does the
“Insufficient card
memory” or
“Insufficient
internal memory”
message appear?

There is no more
available memory
on the card or in
the camera’s
internal memory.

Delete unnecessary
files, or use a card
that has more
memory available.

Why does the
“Card is
protected”
message appear?

The lock switch on
the card is in the
locked (protect)
position.

Move the lock switch
to the unlocked
position.

Why can’t the
camera be
operated?

A temporary
internal circuitry
problem may be
the cause.

Remove the AC
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.

A problem such
as inability to
record or play
back occurs.

The card contains
files that were
saved using a
device other than
this camera.

After saving your
files to a different
medium, format the
card.

Question

Answer

Action

Summary of Contents for Xacti VPC-CA100EX




























































































Search results

Summary of Contents for Xacti VPC-CA100EX

Reviews:

Related manuals for Xacti VPC-CA100EX

Brands by name

Popular brands

Sanyo Xacti VPC-CA100EX, Manual For Basic Operation

Search results

Summary of Contents for Xacti VPC-CA100EX

Reviews:

Related manuals for Xacti VPC-CA100EX

Brands by name

Popular brands