Sanyo VPC-PD2BK, Instruction Manual

Page: 24 / 64

9
English
HINT
Recharging when connected to the USB terminal
i
The battery can be recharged while the camera is connected to a
computer.
i
Note, however, that the time it takes to recharge will differ depending on
the camera’s operating condition.
i
Connect the dedicated USB interface cable to the USB connector on your
computer. Do not connect it to the USB connector on the monitor or the
keyboard, or to the USB hub.
i
If the camera is not going to be used for an extended period of time, please
disconnect the dedicated USB interface cable from the camera.
About the temperature alert icon
\
During camera use, if the temperature of the battery or inside the camera
(excluding the battery) rises, a temperature alert icon
\
will appear as
described below.
k
When the battery or internal camera (excluding battery) temperature
rises during use
h
During camera use, if the temperature of the battery or inside the
camera (excluding the battery) rises, a
\
icon lights on the monitor. It
is still possible to record and play back even when the
\
icon is lit;
however it is advised that you discontinue use as soon as possible and
turn the camera off.
h
If the temperature rises further, the
\
icon will start to flash, and the
camera will turn off automatically.
The camera cannot be turned on until the temperature has dropped (or
as long as the
\
icon remains flashing). Please wait until the
temperature has dropped before resuming use.
h
During video recording, a countdown indicator will show the time
starting about 15 seconds before shutdown. When the indicator shows
0 seconds, recording stops.
h
If the camera is turned off while the temperature is high (that is, while
the
\
icon is flashing), it cannot be turned on again until the
temperature has dropped (or as long as the
\
icon remains flashing).