Sanyo VPC-PD1EXBK, Service Manual

Page: 17 / 50

– 17 –
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera when zoom tele edge. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Adjustment value determination is effectuated using “WB”,
"CHECK" and “MS” values.
If WB=w1, w2, w3, CHECK=wc0, wc1, wc2, MS=ms1, ms2
and the adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
200<=w1<=310, 310<=w3<=470
wc0=128
±
2, wc1=128
±
2, wc2=150
±
50
3400<=ms1<=5300, 3450<=ms2<=5350
Adjustment values other than the above are irrelevant.
3. White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select “CCD Defect” on the LCD “Test”, and click the “Yes”.
3. After the adjustment is completed, OK will display.
4. Click the OK.
PZ_SW_B_C: PZ2
PZ2: adjustment value of zoom PR switch position 2
(1051<=PZ2+PBR<=1116)
PZ_SW_C_B: PZ3
PZ3: adjustment value of zoom PR switch position 3
(1006<=PZ3+PBR<=1116)
PZ_BR: PBR
PBR: adjustment value of zoom backrush pulse
(0<=PBR<=45)
PZ_SP: PSP
PSP: adjustment value of zoom sink pulse
(210<=PSP<=320)
AF_SW: ASW
ASW: adjustment value of focus PI switch position
(893<=ASW<=985)
AF_BR: ABR
ABR: adjustment value of focus backrush pulse
(0<=ABR<=12)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–44<=ZW<=47)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–76<=ZM1<=48)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(–104<=ZM2<=57)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(–97<=ZM3<=76)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–98<=ZT<=94)
2. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100
±
20 (K)
Luminance: 900
±
20 (cd/m
2
)
Camera
Pattern box
(color viewer)
Dsc Calibration
x
OK
AWB Results:
1:
WB=245,482,418
CHECK=128,129,138
MS=4263,4390
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLEVEL_FOR_ISO=-1
Copy