Sanyo VPC-CS1 - Full HD 1080 Video, Service Manual

Page: 17 / 56

– 17 –
3-8. Adjust Specifications
1. Lens Adjustment (Barcode Input)
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Click the “QrCode”.
3. QrCode Input Dialog display will be displayed.
4. Deselect Bar code Input.
5. Enter the numeric character which are rightmost one
figure the bar code which is included with the lens.
Example:
6. Click the Execute.
7. Click the OK.
Note: The input box have the following limits on input.
Only contain numerical input from 0 to 2.
3-6. The adjustment item which in necessary in part exchange
COMPL PWB CP1
Factory
Cord
Setting
Language
Setting
COMPL PWB CP2
COMPL PWB VF1
COMPL PWB TB1
Reset
Setting
ASSY, UNIT CCD
Lens
Adjust-
ment
(80 cm)
AWB
Adjust-
ment
USB
storage
information
registration
CMOS
White Point
Defect
Detect
Adjustment
CMOS Black
Point And
White Point
Defect Detect
Adjustment
In Lighted
: Be sure to carry out the necessary adjustments after replacing the unit.
: Adjustment is possible from the menu setting screen of the camera and by using the calibration software.
COMPL PWB TB2
COMPL PWB TB3
Lens
Adjust-
ment
(Infinity)
LENS
3-7. Updating the firmware
Check the firmware version immediately after the CP1 board has been replaced. If an old version is being used, interfer-
ence and errors in operation may also occur. If an old version is being used, update it with a newer version.
Refer to
3-13. Firmware uploading procedure. (Page 22)
Optical
Axis
Adjust-
ment
Lens
Adjust-
ment
(Barcode
input)
Enter “2”
LED
Light
AWB
Adjust-
ment