– 3 –
1. OUTLINE OF CIRCUIT DESCRIPTION
1-1. CMOS CIRCUIT DESCRIPTION
1. IC Configuration
The CMOS peripheral circuit block basically consists of the
following ICs.
IC911 (MT9N001I125TC)
CMOS imager
CDS, AGC, ADC built-in
H driver, V driver, serial communication circuit built-in
2. IC911 (CMOS)
[Structure]
The electric charges which are generated when each pixel is
optically converted are in turn converted into signal voltages
by the FD amplifier, and they are then transmitted by the built-
in H driver and V driver. The signals are sampled and ampli-
fied by the CDS and PGA circuits at the point they are output,
and then they are AD converted and output. The output uses
the 12 bit parallel interface.
1/2.3-inch positive pixel array CMOS-type fixed imaging ele-
ment
Effective pixels
3488 (H) X 2616 (V)
