Sanyo VPC CG6 - Xacti Camcorder With Digital player/voice Recorder Instruction Manual Download

Page: 172 / 202

English

158

Adjust the printer settings.

Toggle the SET button up or
down to select a printer setting
parameter, and press the SET
button.

The screen to set the selected
parameter appears.

Toggle the SET button up or
down to adjust the setting, and
press the SET button.

The selected parameter is set,
and you are returned to the
Printer Settings Screen.

Follow the same procedure to
adjust the other parameters, as
desired.

The contents of the settings that
can be made for each
parameter will differ depending
on the printer.

The images will be printed
according to the settings specified
on the printer side.

Press the MENU button.

You are returned to the PictBridge MENU.

HINT

The printer setting parameters will differ depending on the printer that is
connected.

To use printer functions which do not appear on your camera’s Printer
Settings Screen, select “PRINTER VALUES”.

If a function set by the camera is not available in the printer, the camera’s
printer settings will automatically change to “PRINTER VALUES”.

PRINTER SETTINGS

MEDIA TYPE

PRINTER VALUES

<When “MEDIA TYPE” is

selected>

Summary of Contents for VPC CG6 - Xacti Camcorder With Digital player/voice Recorder











































































































































































































Search results

Summary of Contents for VPC CG6 - Xacti Camcorder With Digital player/voice Recorder

Reviews:

Related manuals for VPC CG6 - Xacti Camcorder With Digital player/voice Recorder

Brands by name

Popular brands

Sanyo VPC CG6 - Xacti Camcorder With Digital player/voice Recorder, Instruction Manual

Search results

Summary of Contents for VPC CG6 - Xacti Camcorder With Digital player/voice Recorder

Reviews:

Related manuals for VPC CG6 - Xacti Camcorder With Digital player/voice Recorder

Brands by name

Popular brands