background image

Precautions

2

     

English

Do not touch the power cord or plug with wet
hands. Doing so may cause an electric shock.

Cautions regarding the location where the
monitor is used.

Do not place it in locations with excessive
humidity or dust, or location subjected to oily
vapors or steam.

Do not place it in locations subject to direct
sunlight or near heat generating equipment.
Doing so may cause an accident property
damage.

Do not cover the air vents

Do not place the monitor in a poorly ventilated
location. Do not block its air vents by covering it
with a cloth, placing it on a carpet or blanket, or
other means. If the air vents are blocked, the
internal temperature will rise and it may cause a
fire.

Cleaning

Dirt can be removed from the cabinet by wiping
it with a soft cloth. To remove stains, wipe with
a soft cloth moistened with a soft detergent
solution and wrung dry, then wipe dry with dry
soft cloth.

Do not use benzine, thinner or other chemical
product on the cabinet, as that may cause
deformation and paint peeling.
Before using a chemical cloth, make sure to
read all accompanying instructions. Make sure
that no plastic or rubber material comes in
contact with the cabinet for a long period of
time, as that may cause damage or paint
peeling.

SERVICE

This unit is a precision instruments and if treated
with care, will provide years of satisfactory
performance. However, in the event of a
problem, the owner is advised not to attempt to
make repairs or open the cabinet. Servicing
should always be referred to your dealer or
Sanyo Authorized Service Centre.

Please note:

Your SANYO product is designed and
manufactured with high quality materials and
components which can be recycled and
reused.
This symbol means that electrical and
electronic equipment, at their end-of-life, should
be disposed of separately from your household
waste.
Please dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic products.
Please help us to conserve the environment we
live in!

This symbol mark and recycle system are
applied only to EU countries and not applied to
the countries in the other area of the world.

Summary of Contents for VMC-8214P















Reviews: