SETTINGS
Lens iris adjustment
If using a DC type auto-iris lens, you will need to set the
LEVEL
(VR301) volume when shooting in the conditions described below.
L (counterclockwise):
To decrease the contrast
H (clockwise):
To increase the contrast
•
If shooting simultaneously in a dark room and through a bright
window.
•
If the subject background is extremely bright or dark.
•
If the brightness of the picture on the monitor is not correct.
C • B/W (color/black and white) switch setting
This switch lets you select the timing of the automatic switching of
the optical filter to color image or black and white image, according
to the subject brightness. The default setting is “
L
”. Set the switch
according to the brightness.
(Fig. 2)
H
: for a brighter setting than
L
L
: Standard setting
Notes:
•
After the power has been turned off, switching will restart from
color, when the power is restored.
•
A sound may be heard when the color image or black and white
image is switched. Also, the image will be distorted as shown in
Fig. 2
, this is normal and does not indicate a problem.
•
When using infrared lighting, if there is a strong reflection on the
subject, the optical filter may switch from black and white to color
mode, Use only enough infrared lighting so that the mode is not
switched.
•
The focus setting may be different in black and white mode and
color mode. Please check the focus setting in both modes.
VR301
LEVEL
C-BW
L
H
L53Z4/US GB 2001, 4, 2
English
15
