SETTINGS
Line phase adjustment
Set the
SYNC
switch to the
L-L
position.
When using a camera switcher to connect 2 cameras or more to one
monitor, there may be a vertical roll of the images when switched. In
such a case, set as described below.
Switch the display on the monitor from camera 1 to camera 2.
Adjust the
LINE PHASE
volume on camera 2 until the vertical roll of
the image stops.
If more than two cameras are used, please repeat this procedure for
all the cameras.
CAUTION:
If the vertical roll cannot be corrected by setting the
LINE PHASE
volume on camera 2, try setting the
LINE PHASE
volume on camera
1. If it still cannot be corrected, please check that the polarity of the
power cords of all connected devices is correct.
L-L
SYNC
INT
L53S4/XE GB 1999, 6, 16
14
English
