PARTS NAMES
9
Lens iris output connector (LENS)
This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.
F
Camera setup section (under the cover)
These settings are for when using a 1/4 inch CS mount
DC
(without
EE
internal amplifier) type lens. However,
if due to installation conditions or environment the settings may need to be modified for best results (see
"
SETTINGS
"). To access the controls, remove the cover fixing screw, then remove the cover.
F
9
CONCERNING AUTO-IRIS LENSES
DC type auto-iris lens
A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is
referred to as DC type coil lens or DC type non-amplifier lens.
(Set the
IRIS
switch to the
AI
position.)
L5AH5/XE GB 2002, 12, 24
English
5
