manualshive.com logo in svg

Sanyo VCC-3912, Instruction Manual, Page: 3 / 16

Share
Download
Sanyo VCC-3912 Instruction Manual Download Page 3

CONTENTS

ACCESSORIES....................................................1

INFORMATION TO USER ..................................2

FEATURES ..........................................................3

PRECAUTIONS...................................................4

PREPARATION...................................................5

CONNECTIONS ..................................................8

SETTINGS.........................................................10

TROUBLESHOOTING.......................................13

SPECIFICATIONS .............................................14

Important settings

Depending on the conditions of use,
installation and environment, please be sure
to make the following settings and
adjustments. If you need help with
installation and/or settings, please consult
your dealer.

Auto-iris lens setting.............................. 6 ~ 7
Flange-back adjustment ............................10
Lens iris adjustment ..................................10
White balance adjustment........................ 11
Electronic iris function setting .................. 11
Backlight compensation setting ............... 11
High speed electronic shutter setting ...... 12

CAUTION:

Before installing and using the camera,
please read this manual carefully. Be sure
to keep it handy for later reference.

ACCESSORIES

1

C mount adaptor (5 mm).................1 pc.
The C mount adaptor must be used to
be able to install a C mount lens on the
camera.

2

Lens iris plug (4-pin).........................1 pc.

3

AC adaptor ......................................1 pc.

1

2

3

L53L2/US  GB  1995, 11, 1

English

 1

Summary of Contents for VCC-3912

















Reviews:

No comments