TAPE COUNTER
Using the counter, it is easy to find a desired recording.
1
Press the COUNTER RESET button, at the beginning
of the desired recording.
ø
The counter will be reset to “0
H
00
M
00
S
”.
2
Press the COUNTER MEMORY button.
ø
“
[
”
is displayed on the digital display.
ø
To cancel the counter memory function, press
the
COUNTER MEMORY
button a second time.
3
After recording or playback, press the REW button
from stop mode.
ø
The tape is rewound to the counter “0
H
00
M
00
S
”
reading.
ø
If you rewind the tape past the “0
H
00
M
00
S
”
position, press the
FF
button.
NOTES:
X
There is no tape counter indication for the blank
portions of the tape.
X
In the 2-hour recording speed mode only, the tape
counter indicates real hours, minutes and seconds.
X
In the other recording speed modes, the tape counter
indication is a ratio of the 2-hour mode base indication.
(In 12-hour recording mode, each “second” of the tape
counter actually represents approximately 12/2 + 1 = 7
real seconds.)
X
There may be a slight discrepancy between the
position shown on the tape counter and the actual tape
position.
X
When rewinding the tape past the “0
H
00
M
00
S
”
position, a minus (–) sign will be displayed.
SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1
While holding the SHIFT
*
button, press the
REC/PLAY SPEED
j
button.
ø
“
x
”
is displayed on the digital display.
To cancel the security lock, while holding the SHIFT
*
button, press the REC/PLAY SPEED
l
button, “
x
”
will be erased from the digital display.
NOTES:
X
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
X
The security lock cannot be engaged while a menu is
displayed.
RC4Q/NA2 (TLS-9072 GB) Thu. Sept., 07/2000
English
31
Summary of Contents for TLS-9072
Page 19: ......
