background image

Note:

•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.

• The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient 

lighting in order to get the best image.

•All measurements are approximate and may vary from the actual sizes. 

64”

70”

78”

80”

60”

 A

3.215’ (0.98 m)

3.150’ (0.96 m)

2.789’ (0.85 m)

2.559’ (0.78 m)

(Inch Diagonal)

2.395’ (0.73 m)

For the projector positioning, see the figures below.  

The projector should be set perpendicularly to the plane of the screen. 

Projection angle can be adjusted up to 10.0 degrees with 

the adjustable feet. 

Lift the front of the projector and pull the feet lock 

latches on both sides of the projector upward.

1

Adjustable Feet

Feet Lock Latches

Release the feet lock latches to lock the adjustable feet 

and rotate the adjustable feet to adjust the position 

and tilt. 

2

To retract the adjustable feet, lift the front of the 

projector and pull and undo the feet lock latches.

Keystone distortion of the projected image can be 

corrected by menu operation (pp.22, 41).

3

Adjustable Feet

Positioning the Projector

13

Screen Size

(W x H) mm

4:3 aspect ratio

60”

64”

70”

78”

80”

1219 x 914

1300 x 975

1422 x 1067

1585 x 1189

1626 x 1219

Throw distance 2.395’ (0.73 m) 2.559’ (0.78 m) 2.789’ (0.85 m) 3.150’ (0.96 m) 3.215’ (0.98 m)

A

0.417’ (12.7 cm) 0.430’ (13.1 cm) 0.446’ (13.6 cm) 0.469’ (14.3 cm) 0.476’ (14.5 cm)

Installation

Summary of Contents for Think GAIA PLC-XE45






































































Reviews: