1. Ringer Volume Selection
2. Receiver and Speaker Volume Adjustment
3. Redial Function
4. Speaker Function
5. Flash Button
HI
LO
OFF
RD/P
R
R
R
TIME
SETTING
FUNCTION OPERATIONS
TIME SETTING
Set the ringer volume switch to the desired position (HI/LO/OFF). To
have the maximum ringer volume, move the ringer volume switch to
the
position. To have a low ringer volume, move the ringer volume
switch to the
position. If you would prefer the ringer not to disturb
you, move the ringer volume switch to the
position.
There are 4 levels for selection. When your phone is in use mode, you
can press the
or
button to adjust the receiver and speaker
volume, and the corresponding level will show on the LCD.
Lift the handset or press the
button, then press the
button to
redial the last dialled number.
To switch your call to speaker phone, press the
button and replace
the handset in the cradle. To switch back, simply lift the handset and
speak as normal. In the speaker state, you can make or answer a call.
Press the
button to terminate a call and institute a dialling tone for
another call or to get another call from "Call Waiting" (a special
telephone service).
In the on-hook state, press and hold the
button to enter the
, (Refer to "
", section"
"
for details).
NOTE:
If you do not have any special telephone service, such as Call
Waiting, pressing
button during a call may disconnect your current
conversation.
FUNCTION BUTTONS
11
4
7. HOUR FORMAT SELECTING
8. DATE FORMAT SELECTING
Press the
button to enter this setting when the LCD shows
and then the current value will display.
Use the
button to select the hour format (12 HOUR/24
HOUR). Press the
button to confirm and exit.
Press the
button to enter this setting when the LCD shows
and then the current value will display.
Use the
button to select the date format (DD-MM/MM-DD).
Press the
button to confirm and exit.
In the DD-MM mode, the time display sequence is day-month and
in the MM-DD mode, the sequence is month-day.
DIAL
HOUR FORMAT
DIAL
DIAL
DATE FORMAT
DIAL
s
s
or
or
t
t
