background image

5

Sensor

A temperature sensor inside the remote control unit senses the room temperature.

ON/OFF operation button

This button is for turning the air conditioner on and off.

1 HR. TIMER button (1-HOUR OFF TIMER)

:  When you press this button, regardless of whether the unit is operating or stopping, the unit operates for 

one hour and then shuts down.

MODE selector button

Use this button to select AUTO, HEAT, DRY, COOL or FAN mode.

(AUTO)

:  When this setting is selected, the air conditioner calculates the difference between the 

thermostat setting and the room temperature and automatically switches to the ‘‘COOL’’ or 
‘‘HEAT’’ mode as appropriate. (This function is available only for “Single use” of COOL/DRY/
HEAT Model.)

(HEAT)

: The air conditioner makes the room warmer.

(DRY)

: The air conditioner reduces the humidity in the room.

(COOL)

: The air conditioner makes the room cooler.

(FAN)

: The air conditioner works only as a circulation fan except for “Multiple use” of COOL/DRY/

HEAT Model.

The indoor fan runs continuously when the system is in normal operation. It does not turn off when the desired room temperature is 
reached. If Night Set Back mode is selected, the fan will turn off intermittently during cooling operation in order to control air flow.

NOTE

SENSOR button

When you press this button (use a small-tipped object such as a ballpoint pen), the 

 mark will disappear at the 

display. And the room temperature is detected by the sensor which is built into the remote control unit and the air 
conditioner is controlled accordingly.

If the remote control unit is located near a heat source, such as a space heater or in direct sunlight, press the 
SENSOR button to switch to the sensor on the indoor unit.

NOTE

TIMER SELECT button

No display : The timer does not operate.

The air conditioner starts at the set time.

The air conditioner stops at the set time.

The air conditioner stops and starts, or starts and stops, at the set times every day.

OI-139-5-EG

01_STK-RCS-7TWSUA_EN.fm  Page 5  Thursday, March 12, 2009  5:14 PM

Summary of Contents for STK-RCS-7TWSUA






























Reviews: