Sanyo SRT-8040P Instruction Manual Download

Page: 23 / 54

NORMAL RECORDING

Setting the Mode at the End of the Tape

You can select the mode on the VCR when the tape
reaches the end during recording.

Press the STANDBY/ON button.

Press the MENU button to display the MAIN MENU.

Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.

The (GENERAL SET) menu appears.

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@01:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

CLOG@DETECT.@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

VERTICAL@SYNC@@@@Y

TAPE@@@@@@@@@@@@@E-240

Turn the JOG dial until the “TAPE END MODE”
setting is highlighted, then turn the SHUTTLE ring
clockwise.

Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.

Setting when not using Autorepeat recording

REW. . . . . . . Rewinds the tape to the

beginning, then goes to stop mode

STOP . . . . . . Goes to stop mode

EJECT . . . . . The cassette is ejected

Setting when using Autorepeat recording

REPEAT1. . . Autorepeat recording mode is

automatically canceled if there
was an alarm trigger

REPEAT2. . . Autorepeat recording mode is

active even if there was an alarm
trigger

Press the MENU EXIT button.

Setting the video input signal

The video input signal during recording can be set to
either colour or black & white.

Press the STANDBY/ON button.

Press the MENU button to display the MAIN MENU.

Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.

Turn the JOG dial until the “VIDEO” setting is
highlighted, then turn the SHUTTLE ring clockwise.

Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.

COLOR . . . . For recording in colour

B/W . . . . . . . For recording in black & white

Press the MENU EXIT button.

NOTES:

Set to “COLOR” for systems which include colour
signals (including cases where black & white signals
are mixed in), and set to “B/W” for systems which only
use black & white signals.

Use the same setting for recording and playback.

If tapes that have been recorded in black & white are
played back when the setting is at “COLOR”, the
recordings will not be played back in colour.

If using a black & white camera, set to “B/W”.
Recordings will not be made in colour even if
“COLOR” is set.

RQ4QR/EX (SRT-8960P GB) Fri. Sept., 06/2002

English

Summary of Contents for SRT-8040P























































Search results

Summary of Contents for SRT-8040P

Reviews:

Related manuals for SRT-8040P

Brands by name

Popular brands

Sanyo SRT-8040P, Instruction Manual

Search results

Summary of Contents for SRT-8040P

Reviews:

Related manuals for SRT-8040P

Brands by name

Popular brands